[twostage]

twostage

twostage

Show twostage's last posts.

Show general stats for twostage.

• 
• Water Bottle Rocketeer
• Posts: 14

Hi every one

After a long debate with my brother we decided to enter the Aurora rocket for the 10k project
here is some (not yet finalized specs)

diameter=105mm
lenght   =5.930m
config   =two stage

1st stage
uses one of the ASR M class motors (M2000) which is a short 3 second burn
uses two aim altimeters for redundant deployment
(also my rocket for my level3 certification)

2nd stage (sustainer)
Uses an ASR N class motor (N-3000) with a nice 6 second burn (19300Ns total impulse)
Uses one aim v1.2 in conjunction with (I hope) one aim X-tra to make recovery of the sustainer easier

PROGRESS

The 1st stage is finished and only needs paint the 2nd stage is still being planned


I hope that we can pull this off before ocktober to fly it with the ASR rocket (ARROW10)

I will post some pictures soon of the finished 1st stage and the fins i've made for the sustainer


I would just like to thank Johann for all is excellent support

[twostage]

twostage

twostage

Show twostage's last posts.

Show general stats for twostage.

• 
• Water Bottle Rocketeer
• Posts: 14

Hi every one

Here is the pictures i said ill post

You can see the fins are hollow in the center for one reason
Weight the center wil be filled with a balsa wood core an covered with 2 layers of fiber glass


and note the lenght of the booster stage so this is going to be a very tall thin rocket haha

ill post more pictures as the build progresses

happy building my fellow rocketeers

[twostage]

twostage

twostage

Show twostage's last posts.

Show general stats for twostage.

• 
• Water Bottle Rocketeer
• Posts: 14

This is the configuration i am planning to use in the booster stage of the Aurora rocket

this is not yet a final design so ill see how everthing fits before i start final assembly

take note on the of the text i added that will help clear thing up if only a little bit